Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 31
8. Storage
Proper storage can positively affect and maintain the oper-
ability of the device. The following important points should
be considered.
f Clean the device before storing.
f Wind up the charging cable without kinking.
f Store the device in its original packaging or in suitable
packaging materials in a clean and dry place.
f Observe permissible storage conditions.
Permissible storage conditions
Storage temperature
Average temperature
in 24 hours
Relative humidity
9. Disposal
Discard the device and packaging according to regulations
at the end of its service life. Observe the national regula-
tions for disposal and environmental protection applicable
in the country of use.
Old devices and batteries must not be disposed of with
household waste.
f Dispose of packaging material in designated collection
containers.
f Dispose of old devices and batteries via your dealer.
10. Accessory
Accessories such as protective roofs or charging cables
can be found on our homepage under "Accessories".
https://www.chargeupyourday.com/
28
-25 °C... + 40 °C
< 35 °C
max. 95 %
(non-condensing)

11. Glossary

Term
Explanation
ACU
Accounting Control Unit
Unit for communication with the SCUs
/ HCC 3s of the charging stations and
for connection to back-end systems.
An ACU is installed in the
eMobility-Gateway and Smart charging
stations.
Back-end
Infrastructure for controlling the
system
charging stations and administration of
personal access data.
eMobility-
MENNEKES eMobility-Gateway for
Gateway
intelligent networking of charging sys-
tems and for connection to back-end
systems.
HCC 3
Unit for control of the charging process
and communication with the vehicle (in
mode 3 charging)
MCB
Miniature circuit breaker
Mode 3
Charging mode for vehicles with com-
(IEC 61851)
munication interface on charging cou-
plers type 2.
RCD
Residual current device
RFID
Authorization option via RFID card to
devices.
SCU
Socket Control Unit
Unit used to control each charging
spot and communicate with the vehi-
cle.
Type 2
Single and three phase charging cou-
(IEC 62196-2)
plers with identical plug geometry for
charging powers from 3.7 to 44 kW AC.
Whitelist
Internal database for managing user
data (e.g. RFID cards).

Advertisement

Table of Contents
loading

Table of Contents