Name Plate; Device Layout - Mennekes AMTRON Series Operating Manual

The device can be used with or without MENNEKES
Charge APP. The MENNEKES Charge APP is not supplied.
However, it is available free of charge in the App Store and
the Google Play Store.
MENNEKES recommends using the device with
the MENNEKES Charge APP.

3.2 Name plate

The name plate contains all important device data. The
name plate shown is a pattern.
f Note the name plate on your device. The name plate is
installed on the housing base.
1
XXXXXXXXX
2
Typ.SN:
3
In : xx A
4
A
U : xxx V ~
5
n
f : xx Hz
6
n
IEC 61851, DIN IEC/TS 61439-7
7
8
Fig.: 2. Name plate (pattern)
1. Manufacturer
2. Type
3. Item / serial number
4. Rated current
5. Rated voltage
6. Frequency
7. Standard
8. Barcode
9. Number of phases
10. Protection type
11. Information
6
xxxxxxxx.xxxxx
xP+N+
9
IPxx
10
AEVCS
11

3.3 Device layout

The enclosure of the device has three parts and consists
of bottom part, top part and front panel. The design of the
front panel depends on the version of the device.
Front view
Fig.: 3. Front view (example)
1. Multifunction button
1)
2. LED Info bar
3. Fastening screws for upper housing part
4. Upper enclosure section
5. Energy meter with inspection window
6. Front panel
7. RFID card reader
1)
8. Type 2 charging socket with hinged lid
9. Pre-cut recess for supply cable / cable duct
Optional
1)
1)