Advanced Programming (Telephone Functions) - golmar GTWIN T-5924 User Manual

T-5924 GTWIN TELEPHONE

ADVANCED PROGRAMMING (TELEPHONE FUNCTIONS)

Advanced programming of the functions of the T-5924 Gtwin telephone:
Advanced programming enables the telephone's default settings to be changed:
Then adjust the settings as required:
- Adjusting the call volume: High volume (default setting).
- Changing the door panel ringtone melody:
The telephone enables selection of the ringtone (5 different tones).
Changing the ringtone melody from the apartment front door:
The telephone enables selection of the ringtone from the apartment front door (5 different tones).
- Activating/deactivating the doctor mode function: Doctor mode not activated (default setting).
The 'doctor mode' function enables the main lock release to be activated automatically 3 seconds after making a
call from the door panel without having to establish communication or press door release button
ends after 15 seconds and the channel becomes free.
(Only the master telephone should be configured with 'doctor mode').
- Exiting programming mode:
With the telephone in standby and the handset on the hook:
Press button
3 short audible tones will confirm this and the status LED will blink
(yellow) slowly, indicating that button
Adjusting the call volume: Press button
minimum and no volume (if set to 'no volume', the telephone's status LED will blink red
rapidly when the telephone exits programming mode and is in standby) in 'carousel mode'.
Select the ringtone melody: Press button
Select the ringtone melody from the apartment front door: Press button
melody is heard 'carousel mode'.
To activate doctor mode: Press button
is activated; if it is pressed again, an audible tone will indicate that the function will change its
status to deactivated and so on. The telephone's status LED will blink (red) rapidly when the
telephone exits programming mode and is in standby.
To exit
'programming mode',
audible tones will confirm this and the status LED will turn off, indicating that button
be released.
Note: Depending on the function modified, the telephone's status LED will indicate this (see p. 4).
for more than 5 seconds to access '
to select the required volume. Options: maximum,
until the desired melody is heard 'carousel mode'.
once, an audible tone will indicate that the function
press button for more than 5 seconds, 1 short and 2 long
programming mode ,
can be released.
until the desired
. The call
10
'
can