golmar GTWIN T-5924 User Manual page 14

T-5924 GTWIN TELEPHONE
OPTIONAL PROGRAMMING (ADDITIONAL TELEPHONE FUNCTIONS)
Continued from previous page.
5. Check the programmed function: lift the handset of the telephone (device C1) and press the programmed button. On
the telephone (device C2), a ringtone will be heard, pick up the handset and check communication.
6. If you also wish to programme the reverse call, it is necessary to programme the telephone (device C2) for the call to
the telephone (device C1) in the same apartment.
Note:
- If the button is programmed for this function, activation of the
function.
- If the buttons and
Cancellation of the telephones' intercom call codes:
1. Press and hold the button
(yellow) confirms entry into programming mode. In all cases, after 10 minutes elapse, the device exits programming
mode and the modified parameters are saved.
2. Press buttons and
exit from programming mode.
are programmed for this function, the other functions are maintained.
for more than 5 seconds:
simultaneously for more than 3 seconds, the command is confirmed by 2 long tones and
'intercom' function disables the
It emits 3 short tones and the slow blinking of the status LED
14
'call to guard unit'