golmar GTWIN T-5924 User Manual page 5

T-5924 GTWIN TELEPHONE
DESCRIPTION OF THE TELEPHONE
Function buttons:
In standby and with the handset off the hook: it activates the intercom between 2 devices
in the same apartment or in different apartments (this feature must be pre-
programmed, see p. 11-14).
During a call or communication process, it enables the secondary lock release to be
activated: one press will activate the lock release for 1 second.
In standby and with the handset off the hook: it enables a call to be made to the guard unit.
In standby and with the handset off the hook: it activates the intercom between 2 devices in the same
apartment or in different apartments (this feature must be pre-programmed, see p. 11-14).
Note: Activation of the
In standby and with the handset on the hook: it enables programming mode to be entered or exited by
pressing and holding for 5 seconds, a number of short audible tones will indicate that the telephone is
in programming mode and the status LED will blink slowly (yellow) or a number of long audible tones
will indicate that the telephone has saved and left programming mode and the status LED will turn off.
In standby and with the handset off the hook: it activates the intercom between 2 devices in the same
apartment or in different apartments (this feature must be pre-programmed, see p. 11-14).
During call reception and communication processes, it enables the main lock release to be activated.
To restore the telephone's default parameters, after entering programming mode by pressing button
5 seconds, simultaneously press buttons
be indicated by 2 long audible tones and the telephone's exit from programming mode.
'intercom' function disables the
and for more than 3 seconds; confirmation of the command will
'call to guard unit' function.
5
for more than