golmar GTWIN T-5924 User Manual page 11

T-5924 GTWIN TELEPHONE
OPTIONAL PROGRAMMING (ADDITIONAL TELEPHONE FUNCTIONS)
Intercom function of the T-5924 Gtwin telephone:
In the Gtwin system, a telephone button can be programmed to call another apartment in the same Building
(channel) or to call another telephone
apartment called will ring; in the second case, only the telephone in the same apartment specified in the
programming will ring.
Intercom function between different apartments:
To programme a telephone in one apartment (apartment A) to call another apartment (apartment B):
Without picking up the handset.
1. Press and hold the button
(yellow) confirms entry into programming mode. In all cases, after 10 minutes elapse, the device exits programming
mode and the modified parameters are saved.
Apartment A
2. Press the button ( , A B
Apartment A
3. Go to the telephone in apartment B that has to call the button to be programmed in
button. The telephones emit a completed programming beep.
Apartment B
in the same apartment
for more than 5 seconds: It emits 3 short tones and the slow blinking of the status LED
or ) to be programmed for at least 3 seconds until the confirmation tone sounds. C
. In the first case, all of the telephones in the
Step 2 and press the door release
Continued overleaf
11