golmar GTWIN T-5924 User Manual page 13

T-5924 GTWIN TELEPHONE
OPTIONAL PROGRAMMING (ADDITIONAL TELEPHONE FUNCTIONS)
Intercom function in the same apartment:
To programme a telephone (internal device C1) to call another telephone (device C2) in the same apartment:
Without picking up the handset.
1. Press and hold the button
(yellow) confirms entry into programming mode. In all cases, after 10 minutes elapse, the device exits programming
mode and the modified parameters are saved.
2. Press the button (A, B or C) to be programmed for at least 3 seconds until the confirmation tone sounds.
3. Go to the telephone (device C2) that has to call the button to be programmed in
button. The telephones (device C1 and C2) emit a completed programming beep.
4. To exit programming mode, press and hold
status LED will turn off confirming exit from programming mode.
for more than 5 seconds: It emits 3 short tones and the slow blinking of the status LED
C1
C1
C2
the button
C1
for more than 5 seconds, 2 long tones are emitted and the
Step 2 and press the door release
Continued overleaf
13