Table of Contents
Advertisement
T-5924 GTWIN
TELEPHONE
OPTIONAL PROGRAMMING (ADDITIONAL TELEPHONE FUNCTIONS)
Continued from previous page.
4.
Or go to a door panel and press the call button of apartment B; the telephone in programming (apartment A) emits a
completed programming beep. While this operation is being carried out, the telephones in apartment B will ring.
Ignore this call.
Apartment A
5.
To exit programming mode, press and hold
status LED will turn off confirming exit.
Apartment A
6.
Check the programmed function: lift the handset of the telephone (apartment A) and press the programmed button. In
apartment B, a ringtone on all telephones in the apartment will be heard, pick up the handset of one of the telephones
called and check communication.
7.
If you also wish to programme the reverse call, it is necessary to programme the telephone in apartment B for the call
to the telephones in apartment A.
Note:
-
If
the
button is programmed for this function, activation of the
function.
-
If
the
buttons
and
the button
are programmed for this function, the other functions are maintained.
APARTMENT B
for more than 5 seconds, 2 long tones are emitted and the
'intercom'
function disables the
12
'call to guard unit'
Hide quick links:
Advertisement
Table of Contents
