Traverse System - Invacare EC-Track Installation & Technical Description

Invacare® EC-Track®

2.2 Traverse system

A traverse system is suited for cases when an unlimited number of lifting places is required in the room.
A traverse system consists of two parallel rails mounted on the ceiling or the wall. In each parallel rail, a traverse trolley is
inserted witch can travel the full length of the parallel rails, from end stop to end stop.
Across the parallel rails a traverse rail is mounted to the two traverse trolleys. This installation can be carried out in
different ways, as shown in the illustrations below. With a hoist trolley inserted in the traverse rail, the hoist can travel
the full length of the traverse rail.
The system permits an unlimited number of lifting places, since the traverse system covers the entire room.
Combinations of traverse systems
Rails
Parallel: S-Profile
Traverse: S-Profile
Parallel: S-Profile
Traverse: M-Profile
Parallel: S-Profile
Traverse: L-Profile
Parallel: M-Profile
Traverse: M-Profile
Parallel: M-Profile
Traverse: L-Profile
6
Combination
Under-hung traverse:
Between-hung traverse:
Under-hung traverse:
Partly between-hung
traverse:
Under-hung traverse:
Under-hung traverse:
Between-hung traverse:
Partly between-hung
traverse:
Under-hung traverse:
Possible combinations
1586749-C