Invacare EC-Track Installation & Technical Description page 12

Invacare® EC-Track®
Rail End Plugs
Type
Rail end plug S, M, L
Pendles
Type
Pendles, adjustable
Track Switch
Type
Track switch, manual
Transit Coupling
Type
Transit coupling
12
Description
Rail end plugs are supplied
for rail profiles of 3 sizes.
Color: white.
To be used at the closure of
both ends of all rails.
Mounting: Press into the rail
profile after the rail system
is mounted.
Description
Pendles are applied if there
is a need for installing a
lower rail system than the
original ceiling level. Can be
used in hidden installation as
well as visible installations.
Sizes (adjustable length):
• 200 – 300 mm
• 280 – 460 mm
• 440 – 740 mm
Description
The track switch is manually
operated and is installed
with a standard ceiling
bracket. The track switch is
used in combination with a
ceiling installed single rail
system with S-profile, where
a change in direction is
required during movement
of the patient.
Description
The transit coupling is
operated electrically and
mounted with pendles in
the ceiling on both sides of
the wall. Length: 800 mm.
The coupling is used for
movement of a patient from
one room to another.
• in traverse systems with
S-, M,- and L-rails.
Info
Info
Installation: See 3.2.2
Concrete Ceiling with
Suspended Ceiling, page 15.
Info
Installation: See chapter 3.9
Installation of track switches,
page 22
Info
Control button (for the
wall), and a transformer are
enclosed when delivered.
Installation: See chapter 3.6
Rail coupling, page 20
1586749-C