Invacare EC-Track Installation & Technical Description page 10

Invacare® EC-Track®
Wall brackets
Type
Wall bracket, end hung
Wall brackets, side hung
Wall bracket, side and end
hung
Insert tubes
Type
Insert tube for rail profile M
or L
Wall support leg, console and wall support foot
Type
Wall support leg
Wall support console
Wall support foot
10
Description
To be used when installing
tracks to a wall. They can be
used when the walls have
sufficiently high carrying
capacity when mounting
straight and diagonally to a
wall.
To be used with insert tubes
and console.
To be used when installing
tracks side hung. Can be
applied if the wall has
sufficient strength.
To be used when installing
tracks either side or end
hung. Can be applied if the
wall has sufficient strength.
Description
To be used when mounting
rail end hung to wall, when
coupling two rails, or when
mounting rails diagonally in
a room.
• Insert tube for rail
profile M: Length 800
mm.
• Insert tube for rail
profile L: Length 1 m.
Description
To be used if the wall does
not have sufficient carrying
capacity when mounting the
rail to the wall. May be used
for the mono rail systems as
well as the traverse systems.
Leg length: 2.6 m / 3 m
The console is also used
together with the end hung
wall bracket when mounting
straight or diagonal.
Low foot for rooms without
skirting board
High foot for rooms with
skirting board pan along the
floor
Info
Installation: See chapter 3.3
Wall installation – end hung
rail, page 18.
Installation: See chapter 3.4
Wall installation – side hung
bracket or side/end hung
bracket, page 19
Installation: See chapter 3.4
Wall installation – side hung
bracket or side/end hung
bracket, page 19
Info
Insert tube is supplied
depending on the particular
mounting situation.
Info
Installation: See chapter 3.7
Wall support legs, page 20
1586749-C