Network Configuration - Dahua EZ-IP TURRET Quick Start Manual

DOME
• Hold the bracket on both sides of the camera module, and rotate it
horizontally.
• Hold the camera module and rotate it around its axis to adjust the lens image
to proper monitoring angle.
• Use a screwdriver to loosen the screws at the sides of the bracket, and hold
the camera module and adjust it vertically.
Note: Range of adjusting lens angle: vertical (0~+75°), horizontal (0~+355°),
image rotation direction (0~+355°).

3. Network Configuration

You can initialize the device and modify IP address via WEB interface. Please
refer to the WEB Operation Manual in the disk for more details.
Note
• It needs to implement initialization if it is the first time use device or the device
is restored to factory default.
• It can implement initialization only when the device IP address (192.168.1.108
by default) and the IP address of PC are in the same network segment.
• The following figures are for reference only; different models may have
different interfaces.
36
Figure 2-13
Ovner's manual