Table of Contents
Advertisement
10. Starting Up
V Panel Express –User's Guide (V1.01)
Fig. 36: Setup Complete for calibration
After complete installation and calibration of touch you find a new icon in the control panel to set additional features.
If calibration does not run automatically, see next subsection.
Calibrating the Touch Screen
10.2.1.3.
Calibration serves two purposes:
❏ Sets the active area of the touch screen
❏ Aligns the active area of the touch screen to the screen's image.
Before you calibrate the touch screen, let the unit warm up for 30 minutes.
Fig. 37: ELO Touchscreen properties
Calibration aligns the active touch-sensitive area of the touch screen with the image on the display. Calibration also
determines the edges of the screen's image and locates the center of the touch screen. If the touch screen is not
www.kontron.com
37
Advertisement
Table of Contents
