Operating System And Hardware Component Drivers; Hints For The Installation Of The Elo Touch Screen Controller Driver - Kontron V Panel Express 121 User Manual

Hide thumbs Also See for V Panel Express 121:

Table of Contents

10. Starting Up

10.2. Operating System and Hardware Component Drivers

Your V Panel Express system can be supplied either with or without a pre-installed operating system.

If you have ordered your system with a pre-installed operating system, all drivers are installed in accordance with the

system configuration ordered (optional hardware components). Your system is fully operational at the first start-up.

If you have ordered a V Panel Express system without a pre-installed operating system, because you want to install it

yourself, please pay attention to the following instructions:

You can download the relevant drivers for the installed hardware from our web site at

by selecting the product name (designation).

The corresponding driver (depending on the installed operating system) for the touch screen controller

is available on our web site by selecting the "Downloads" tab of the V Panel Express product site.

The display unit is equipped with a resistive touch screen. The touch screen is internally connected to the on-board USB

interface of the installed ETX baseboard.

Preparations of System for Installation Procedure

10.2.1.1.

Before installing the driver please check the following items.

❏ operating system installed

❏ USB port driver for operating system installed.

❏ USB port in BIOS enabled

Install Touch Controller Software

10.2.1.2.

Please download corresponding touch controller software form Kontron web site http://www.kontron.com/.

Fig. 34: Accept License Agreement

V Panel Express – User's Guide (V1.01)

www.kontron.com

Fig. 35: Installing the touch files

www.kontron.com

Table of Contents