Electrostatic Discharge (Esd); Grounding Methods; Instructions For The Lithium Battery - Kontron V Panel Express 121 User Manual

Hide thumbs Also See for V Panel Express 121:
Table of Contents

Advertisement

4. General Safety Instructions for IT Equipment

4.1. Electrostatic Discharge (ESD)

A sudden discharge of electrostatic electricity can destroy static-sensitive devices or micro-circuitry. Therefore proper
packaging and grounding techniques are necessary precautions to prevent damage. Always take the following
precautions:
1. Transport boards in ESD-safe containers such as boxes or bags.
2. Keep electrostatic sensitive parts in their containers until they arrive at the ESD-safe workplace.
3. Always be properly grounded when touching a sensitive board, component, or assembly.
4. Store electrostatic-sensitive boards in protective packaging or on antistatic mats.

4.1.1. Grounding Methods

The following measures help to avoid electrostatic damages to the device:
1. Cover workstations with approved antistatic material. Always wear a wrist strap connected to workplace as well as
properly grounded tools and equipment.
2. Use antistatic mats, heel straps, or air ionizers for more protection.
3. Always handle electrostatically sensitive components by their edge or by their casing.
4. Avoid contact with pins, leads, or circuitry.
5. Turn off power and input signals before inserting and removing connectors or connecting test equipment.
6. Keep work area free of non-conductive materials such as ordinary plastic assembly aids and styrofoam.
7. Use field service tools such as cutters, screwdrivers, and vacuum cleaners which are conductive.
8. Always place drives and boards PCB-assembly-side down on the foam.

4.2. Instructions for the Lithium Battery

The implemented ETX baseboard is equipped with a Lithium battery. For the replacing of this battery please observe the
instructions described in the section 8.3 "Replacing the Lithium Battery".
Caution
Danger of explosion when replacing with wrong type of battery. Replace only with the same or equivalent
type recommended by the manufacturer. The lithium battery type must be UL recognized.
Do not dispose of lithium batteries in general trash collection. Dispose of the battery according to the
local regulations dealing with the disposal of these special materials, (e.g. to the collecting points for
dispose of batteries).
www.kontron.com
V Panel Express –User's Guide (V1.01)
9

Advertisement

Table of Contents
loading

Table of Contents