Display With Touch Screen - Kontron V Panel Express 121 User Manual

7. Product Description

7.1.3. Display with Touch Screen

Depending on the ordered V Panel Express system the built-in display is a 12.1"/15"/17"/19" size TFT display with
corresponding resistive touch screen. The touch screen is USB connected.
For technical specification of the built-in display refer to the chapter 12 "Main Specifications".
The display is equipped with a resistive touch screen. The touch screen offers the same degree of user comfort as the
mouse buttons. A stylus is supplied for touch screen operation.
The surface of the display is also mechanically protected through the touch screen. The touch screen (USB connected)
registers contacts of a finger or a pen and allows moving the mouse pointer. Use a stylus (included) for best results. This
functions only under integration of the necessary software. You get the corresponding touch screen driver for your
operating system, installed on your V Panel Express system (refer to section 10.2 "Operating System and Hardware
Component Drivers". For recalibration of the touch if necessary, please observe the subsection 10.2.1.3 "Calibrating the
Touch Screen".
Do not use a hard or a pointed object (like screw drivers) to operate the touch screen, since it can
damage the touch screen surface.
The front panel and the touch screen are covered by a plastic overlay and care should be taken when
cleaning it (see the section 11.1 "Touch Screen Care and Cleaning").
www.kontron.com
V Panel Express –User's Guide (V1.01)
15