Related Manuals for Kontron Open Frame Monitor 15
Summary of Contents for Kontron Open Frame Monitor 15
- Page 1 USER GUIDE Open Frame Monitor- 15”, 17”, 19” Doc. User Guide Rev. 1.0 Doc. ID: 1066-4064 www.kontron.com...
- Page 2 Open Frame Monitor- 15”, 17”, 19” - User Guide Rev. 1.0 This page has been intentionally left blank www.kontron.com // 2...
- Page 3 In cases of doubt, please contact Kontron. This user guide is protected by copyright. All rights are reserved by Kontron. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the express written permission of Kontron.
- Page 4 ENVIRONMENTAL DAMAGE (COLLECTIVELY, "HIGH RISK APPLICATIONS"). You understand and agree that your use of Kontron devices as a component in High Risk Applications is entirely at your risk. To minimize the risks associated with your products and applications, you should provide adequate design and operating safeguards.
- Page 5 If you have any difficulties using this user guide, discover an error, or just want to provide some feedback, contact Kontron support. Detail any errors you find. We will correct the errors or problems as soon as possible and post the revised user guide on our website.
-
Page 6: Symbols
Eye protection per manufacturer notice shall review before servicing. This symbol indicates general information about the product and the user guide. This symbol also indicates detail information about the specific product configuration. This symbol precedes helpful hints and tips for daily use. www.kontron.com // 6... -
Page 7: For Your Safety
Therefore, in the interest of your own safety and of the correct operation of your new Kontron product, you are requested to conform with the following guidelines. -
Page 8: Lithium Battery Precautions
General Instructions on Usage In order to maintain Kontron’s product warranty, this product must not be altered or modified in any way. Changes or modifications to the product, that are not explicitly approved by Kontron and described in this user guide or received from Kontron Support as a special handling instruction, will void your warranty. -
Page 9: Table Of Contents
6.2.1. Connecting the Signal Cables ................................25 6.2.2. Setting up the Touch Screen (option) ............................25 6.2.3. Connecting to Power ................................... 25 6.2.4. Wiring the DC Mating Power Connector............................26 6.3. Starting Up ......................................... 27 6.4. Setting up the Display Options ................................27 www.kontron.com // 9... -
Page 10: List Of Tables
10.2. Transportation ....................................... 37 10.3. Maintenance ......................................37 10.3.1. Cleaning the Display ..................................37 Appendix A: List of Acronyms ..................................38 About Kontron ........................................39 List of Tables Table 1: Accessories ......................................15 Table 2: TFT LCD Display Technical Specification ..........................18 Table 3: PC Display Modes 15”/17”/19”... - Page 11 Figure 13: DC Mating Power Connector 2-Pin, 12 VDC and 3-Pin, 24 VDC ..................26 Figure 14: Changing the Display Resolution ............................27 Figure 15: Interface and Power Connectors ............................29 Figure 16: OSD Control Panel Buttons ................................ 31 www.kontron.com // 11...
-
Page 12: 1/ General Safety Instructions For It Equipment
Handling and operation of the product is only permitted for trained personnel within a work place that is access controlled. Maintenance or repair on the open product may only be carried out by trained personnel authorized by Kontron that are aware of the associated dangers. ... -
Page 13: Electrostatic Discharge (Esd)
Keep the work area free of non-conductive materials such as ordinary plastic assembly aids and styrofoam. Use field service tools such as cutters, screwdrivers, and vacuum cleaners that are conductive. Always place drives and boards with the PCB-assembly-side down on the foam. www.kontron.com // 13... -
Page 14: 2/ Introduction
Touch screen: capacitive, resistive or protection glass Front: diverse options, e.g. aluminum, stainless steel, for 19” rackmount etc. Figure 1: Open Frame Monitor Figure 2: Open Frame Monitor with Front Frame (bezel) Figure 3: Open Frame Monitor 19” Rackmount including OSD www.kontron.com // 14... -
Page 15: 3/ Shipping And Unpacking
Check the contents for visible shipping damage. If you notice any shipping damage or inconsistencies between the contents and the original order, contact Kontron for help and information. 3.3. Scope of Delivery The Open Frame Monitor (15”/ 17”/ 19”) is delivered with standard configuration options such as frame and protective glass, factory installed. -
Page 16: 4/ Product Description
4/ Product Description Before working with the Open Frame Monitor, Kontron recommends that users take a few minutes to learn about the Open Frame Monitor’s various parts and to observe the instructions and any warning notices within this user guide. -
Page 17: Figure 5: Rear Side
Open Frame Monitor- 15”, 17”, 19” - User Guide Rev. 1.0 Figure 5: Rear Side Ventilation holes OSD control panel Mounting brackets (corner and middle) Connector panel for interface and power cable www.kontron.com // 17... -
Page 18: 5/ Technical Specification
15" 17" 19" 800 x 600 46.875 75.000 15" 17" 19" 1024 x 768 48.363 60.004 15" 17" 19" 1024 x 768 60.023 75.029 17" 19" 1280 x 1024 63.981 60.020 17" 19" 1280 x 1024 79.976 75.025 www.kontron.com // 18... -
Page 19: Power Specification
59.887 5.2. Power Specification The Open Frame Monitor is powered from an external Power Supply Unit (PSU). Kontron recommends the use of Kontron’s specified PSU chosen to meet the product’s power specification and power protection requirements. The Open Frame Monitor’s electrical specification can be found on the product’s type label. -
Page 20: Environmental Specification
Display Size 15” Spec. 17“ Spec. 19” Spec. (4:3) Cooling Fanless passive cooling Weight 3.5Kgs 4.7Kgs 5.1 Kgs Color RAL 7021/Black grey (front frame) RAL 7035 /Light grey ( 19“ rackmount) Protection Class Front up to IP65 www.kontron.com // 20... -
Page 21: 15" Chassis
Open Frame Monitor variants Chassis and Front Frame (bezel). With a bezel the dimensions of the Open Frame Monitor are different. 5.5.1. 15” Chassis Figure 6: 15” Chassis 5.5.2. 15” Monitor with Front Frame (bezel) Figure 7: 15” Monitor with Bezel www.kontron.com // 21... -
Page 22: 17" Chassis
Open Frame Monitor- 15”, 17”, 19” - User Guide Rev. 1.0 5.5.3. 17” Chassis Figure 8: 17” Chassis 5.5.4. 17” Monitor with Front Frame (bezel) Figure 9: 17” Monitor with Bezel www.kontron.com // 22... -
Page 23: 19" Chassis
Open Frame Monitor- 15”, 17”, 19” - User Guide Rev. 1.0 5.5.5. 19” Chassis Figure 10: 19” Chassis 5.5.6. 19” Monitor with Front Frame (bezel) Figure 11: 19” Monitor with Bezel www.kontron.com // 23... -
Page 24: 6/ Installation And Starting Up
I/O cables. When connecting cables, following proper cabling procedures: • Grounding pin is connected first and disconnected last • Connect all I/O cables • Power connection is the last connection www.kontron.com // 24... -
Page 25: Connecting The Signal Cables
USB Touch Cable or Serial Touch Cable, see Table 1: Accessories. 6.2.3. Connecting to Power Kontron recommends the use of Kontron’s PSU chosen to meet the product’s power specification and power protection requirements, see Table 1: Accessories. Only connect to a PSU with a rated input voltage, power cable and the external overcharge protection that corresponds with the electrical specification on the product’s type label and... -
Page 26: Wiring The Dc Mating Power Connector
Fasten the slotted pan head screws to secure the wires in the DC mating power connector’s clamps. The power connection wires must be clearly marked (+/GND) to ensure proper connection to the power connector and main power supply. www.kontron.com // 26... -
Page 27: Starting Up
Click on the arrow (downward facing) to access the Resolution drop down list. Move the arrow (Figure 14, Pos. 1) to the required resolution, and click OK. Figure 14: Changing the Display Resolution Arrow to change Resolution Advanced Settings to change the refresh rate www.kontron.com // 27... - Page 28 Click on “Advanced Settings” (Figure 14, Pos. 2) and in the pop up window that appears click “Monitor”. This displays the monitor type and the current refresh rate. Alter, the refresh rate if required. Kontron recommends a refresh rate of 75Hz.
-
Page 29: 7/ Connectors
Use only one of the 12 VDC power connectors (2-pin, 12 VDC or the DC-IN 12 VDC Jack). 7.2. DVI - D Connector DVI-D Connector Description Connector for digital video signal 7.3. VGA Connector VGA 15-pin D-Sub Connector Description Connector for analogue RGB Video signals www.kontron.com // 29... -
Page 30: Serial Port
Open Frame Monitor- 15”, 17”, 19” - User Guide Rev. 1.0 7.4. Serial Port For PCs with a serial port, Kontron supplies a serial port touch cable. For more information, see Table 1: Accessories. Serial Port Description RS232 Touch( DE-9) connector with thumb screws for “Serial Touch Cable”... -
Page 31: 8/ Osd Control Panel
Pressing the Auto button (Figure 16, Pos. 6) displays the following OSD window status to indicate that the screen is auto adjusting. If there is no VGA/DVI/DP input signal the following OSD status window appears for 3 seconds indicating that No Cable is connected. www.kontron.com // 31... -
Page 32: Table 9: Osd Screen Icon Functions
Select the Auto Adjustment using + and - buttons To be effective, image should be full screen(VGA mode only) Exit Select the Exit using + and - buttons Input select Select the VGA or DVI input using + and - buttons www.kontron.com // 32... -
Page 33: Osd Windows- Example Brightness
Press “+” (Figure 16, pos. 4) to increase the Red, Green, Blue value or Press “-“ (Figure 16, pos. 5) to decrease the Red, Green, and Blue value. Press the “Auto Adjust” downwards arrow to move down (one-step downwards) to the next color. Press “OSD” (Figure 16, pos.3) to return (one-step backwards) to the OSD screen icon bar. www.kontron.com // 33... -
Page 34: 9/ Technical Support
Open Frame Monitor- 15”, 17”, 19” - User Guide Rev. 1.0 9/ Technical Support 9.1. Trouble Shooting Before contacting Kontron’s Support Department, check the following. Table 10: Trouble Shooting Information No image is showing Is the power cable connected to the monitor? Check to make sure that the power cable is connected to both the monitor and the power outlet. -
Page 35: Technical Support
RMA number. The buyer accepts responsibility for all freight charges for the return of goods to Kontron's designated facility. Kontron will pay the return freight charges back to the buyer's location in the event that the equipment is repaired or replaced within the stipulated warranty period. Follow these steps before returning any product to Kontron. -
Page 36: Warranty
Open Frame Monitor- 15”, 17”, 19” - User Guide Rev. 1.0 9.4. Warranty Kontron warrants products in accordance with defined regional warranty periods. For more information about warranty compliance and conformity, and the warranty period in your region, refer to the General Terms and Conditions of Sale document for your region by visiting http://www.kontron.com/terms-and-conditions. -
Page 37: 10/ Storage, Transportation And Maintenance
The storage facility must meet the products environmental storage requirements as stated within this user guide. Kontron recommends keeping the original packaging material for future storage or warranty shipments. -
Page 38: Appendix A: List Of Acronyms
Secure Shell Red, green, Blue RoHS Restriction Of Hazardous Substances SELV Safety Extra Low Voltage Serial Number Thin Film Transistor Universal Serial Bus VESA Video Electronics Standards Association Video Graphics Array WEEE Waste Electrical and Electronic Equipment www.kontron.com // 38... -
Page 39: About Kontron
Open Frame Monitor- 15”, 17”, 19” – User Guide Rev. 1.0 About Kontron Kontron is a global leader in Embedded Computing Technology (ECT). As a part of technology group S&T, Kontron offers a combined portfolio of secure hardware, middleware and services for Internet of Things (IoT) and Industry 4.0 applications.