Interfaces - Kontron V Panel Express 121 User Manual

7. Product Description

7.2.6. Interfaces

USB 2.0 Connectors
7.2.6.1.
The system is equipped at the front side with 4x USB 2.0 interface connectors (Fig. 8, pos. 1). These connectors provide
connections for USB-compatible devices.
DVI-I Interface Connector
7.2.6.2.
The DVI-I interface (Single Link) (Fig. 8, pos. 19) supports both digital and analog connections. Digital devices can be
connected directly to this interface of the V Panel Express. Analog devices should be connected to this interface via a DVI
to VGA adapter (not included).
Serial Interface Connectors (COM1, COM2, COM3 and COM4)
7.2.6.3.
These serial interfaces (Fig. 8, pos. 7 and 21) (RS232 connections) are available as 9-pin D-SUB plugs and provide
connection for serial devices. For the optional COM 4 port (Fig. 8, pos. 21) can be ordered a configuration as RS 232,
RS422 or RS485 (isolated or non isolated).
The serial interface marked "COM4" (Fig. 8, pos. 21) is an option and can be ordered as RS232, RS422 or
RS485 interfaces (isolated or non isolated). Only factory configuration is possible.
Ethernet Interface Connectors
7.2.6.4.
These interface connectors (Fig. 8, pos. 2 and 3) are provided as RJ45 sockets with integrated LEDs. The data transfer rate
depends on the installed ETXexpress module (see below):
Ethernet Port Data Transfer Rate for System Configuration with:
ETXexpress-CD Module
LAN1
10/100 Mbps
LAN2
10/100/1000 Mbps
LAN LED States:
Left LED State
off
green
yellow
www.kontron.com
ETXexpress-PM Module
10/100/1000 Mbps
10/100/1000 Mbps
Link Speed Right LED State
10 Base-T Off
100 Base-T Green
1000 Base-T
V Panel Express –User's Guide (V1.01)
ETXexpress-PC Module
10/100/1000 Mbps
10/100/1000 Mbps
Link Activity State
Link not active
Link active
19