16. Brief instructions
a) Linking the activation switch to the alarm base station
• Mount the activation switch but do not yet insert the batteries
• Set the alarm base station to sensor-detection mode (do not forget to select
the activation switch with the ' ' button)
• Insert the batteries into the activation switch
• The alarm base station must now recognise the activation switch
• Enter a name for the activation switch
• Return to the top level of the alarm base station (press ' C' three times)
b) Opening the casing, replacing the batteries
• Set the activation switch to maintenance mode from the alarm base station
• Open the activation switch's casing
• Replacing the batteries
• Close the casing
• Exit the maintenance mode of the alarm base station
17. Declaration of conformity (DOC)
We, Conrad Electronic, Klaus-Conrad-Straße 1, 92240 Hirschau (Germany),
hereby declare that this product complies with the fundamental requirements
and other relevant regulations of directive 1999/5/EC.
You can find the declaration of conformity for this product at
www.conrad.com
35