Table of Contents
Advertisement
• Return to the alarm base station. The LCD's
display has changed. See the figure on the right.
Here, '1 1 1 1 1 ' is the number of the activation switch
(a maximum of four are possible).
• Use the buttons on the alarm base station to enter
the name of the activation switch, for example
'Main door
Main door
Main door
Main door'.
Main door
To enter the letters use the 2-9 buttons, each
of which represents several letters (click
through as with a mobile phone by repeat-
edly and quickly pressing the same button).
Numbers and umlauts can also be found on
the buttons.
Use the '0' button to enter a space character.
Special characters can be entered using the
' ' and ' ' buttons.
You can use the 'Menü a/A' button to switch
between lower and upper case.
The cursor automatically jumps to the next
position approx. one second after the last
button was pressed.
You can use the ' C' button to delete a
character you entered incorrectly by mis-
take.
• By pressing the 'OK' button, you are now able to
register the next activation switch.
• Press the ' C' button three times to exit the alarm
base station's registration mode. You are in the
normal display mode again (top level) of the
alarm base station.
16
rem. sw.
_
rem. sw.
Main
door
rem. sw.
clear
disarm
16:40 14.12
1
1
2
Advertisement
Table of Contents
