Table of Contents
Advertisement
• Now go to the activation switch that you wish to register with the alarm base
station.
After installing the activation switch the casing of the device is
still open, the batteries are not yet inserted.
• Insert 3 AAA batteries, making sure that
the polarity is correct. See figure 12.
• The activation switch contacts the alarm
base station by sending a radio signal.
The red LED on the activation switch
briefly lights up, and the alarm base
station emits a short signal tone to con-
firm signal reception.
• Close the casing of the activation switch,
so that the two locking hooks audibly click
in.
KL3
KL2
D2
KL1
TA1
D3
TA2
TA3
D1
-
-
Figure 12
D1
25
Advertisement
Table of Contents
