Table of Contents
Advertisement
Chapter 3: Deskphone installation in the IP
Installation methods
To install Avaya E129 SIP Deskphone, you can select any of the following methods:
1.
Configuration 1
on IP Office. The DHCP server returns the DHCP option 66 to Avaya E129 SIP Deskphone
that provides the firmware and configuration server details to the deskphone.
2.
Configuration 2
66: You can use a third-party DHCP server and configure the DHCP option 66. The DHCP
option 66 provides the firmware and configuration server details to deskphones.
3.
Configuration 3
option 66: You can use a third-party DHCP server and provide the firmware and
configuration server details to the deskphone through the deskphone interface.
4.
Configuration 4
parameters and the firmware and configuration server details through the deskphone
interface.
Note:
When you configure the VLAN ID by using LLDP on the switch and the phone, the
supported method for getting the VLAN ID is the standard LLDP-MED.
Configuration 1 checklist
No.
Task
1.
Check preinstallation
requirements.
2.
Create deskphone users.
3.
Check the required licenses.
March 2015
Office environment
on page 11 - DHCP server on IP Office: You can enable the DHCP server
on page 12 - Third-party DHCP server configured with the DHCP option
on page 12 - Third-party DHCP server without configuring the DHCP
on page 13 - Static IP configuration: You can configure all the IP
Reference
See
Preinstallation requirements
See
Create deskphone users
See
Licenses
Comments? infodev@avaya.com
on page 17.
Installing and Maintaining Avaya E129 SIP Deskphone
on page 14.
on page 16.
Table continues...
11
Advertisement
Table of Contents
