Installing The Switch On A Table Or Shelf; After Switch Installation - Cisco Catalyst 9300 Series Hardware Installation Manual

Switch Installation
Figure 22: Mounting the Switch in a Rack
1
2

Installing the Switch on a Table or Shelf

Procedure
Step 1 To install the switch on a table or shelf, locate the adhesive strip with the rubber feet in the mounting-kit
envelope.
Step 2 Attach the four rubber feet to the four circular etches on the bottom of the chassis.
Step 3
Place the switch on the table or shelf near an AC power source.
Step 4 When you complete the switch installation, see
configuration.

After Switch Installation

• Configure the switch. For more information, see
• Connect to the stack ports.
• Install the power cord retainer (optional).
• Connect to the front-panel ports.
Phillips machine screw, 3
black
Cable guide 4
After Switch Installation, on page
Setting up the Switch, on page
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
Installing the Switch on a Table or Shelf
Front-mounting position
Number-12 or number-10
Phillips machine screws
35for information on switch
67.
35