10/100/1000 Ports; Poe, Poe+, And Cisco Upoe Ports - Cisco Catalyst 9300 Series Hardware Installation Manual

10/100/1000 Ports

Figure 2: C9300-48UXM Switch Front Panel
1
2
3
10/100/1000 Ports
The 10/100/1000 ports use RJ-45 connectors with Ethernet pinouts. The maximum cable length is 328 feet
(100 meters). The 100BASE-TX and 1000BASE-T traffic requires twisted pair (UTP) cable of Category 5
or higher. The 10BASE-T traffic can use Category 3 cable or higher.

PoE, PoE+, and Cisco UPoE Ports

The PoE+ and Cisco Universal Power Over Ethernet (Cisco UPoE) ports use the same connectors as described
in 10/100/1000 Port Connections, on page
• PoE+ ports: Support for IEEE 802.3af-compliant powered devices (up to 15.4 W PoE per port) and
• Support for pre-standard Cisco powered devices.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
4
Beacon LED (UID
button)
Status LEDs
USB mini-Type B
(console) port
support for IEEE 802.3at-compliant powered devices (up to 30 W PoE+ per port).
4
5
6
39. They provide:
Product Overview
USB Type A storage port
10/100/1000 PoE+ ports
Network module slots