Network Module Port Configurations; C9300-Nm-2Q Module - Cisco Catalyst 9300 Series Hardware Installation Manual

Installing a Network Module
Figure 24: Installing the Network Module in the Switch

Network Module Port Configurations

C9300-NM-2Q Module

If you use a 40G QSFP module, the ports default to 40G interfaces. In this case, the 10G interfaces are displayed
but not used.
Table 18: C9300-NM-2Q Module with 40G QSFP Module
Interface
FortyGigabitEthernet1/1/1
FortyGigabitEthernet1/1/2
TenGigabitEthernet1/1/1
TenGigabitEthernet1/1/2
TenGigabitEthernet1/1/3
TenGigabitEthernet1/1/4
TenGigabitEthernet1/1/5
TenGigabitEthernet1/1/6
TenGigabitEthernet1/1/7
TenGigabitEthernet1/1/8
Action
Configure this interface
Configure this interface
Disregard
Disregard
Disregard
Disregard
Disregard
Disregard
Disregard
Disregard
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
Network Module Port Configurations
45