Operation Flow - GASTRON GTD-2000TxW Instruction Manual

GTD-2000TxW
Instruction Manual

6.3. Operation Flow

■ After power on, it passes self-diagnostic process then enters Measuring Mode. Here, by operating front keys, you
can go to internal System Mode.
■ Timeout for Level1 and Level2 are 10 sec. It is set to 1 h for Level2 Calibration and Test Mode.
■ When "RESET: key contacts at Program Mode Screen, it returns to Measuring Mode. When "RESET" key contacts
at each Program Setting Screen, it returns to the parent step.
■ Operation keys for detector system mode are defined as below.
ITEM NAME
FUNC Function key
RESET Reset key
↑ Up key
↓ Down key
[Figure 11. GTD-2000TxW Mode Configuration]
Detector Mode Setting Entry Function (Insert Magnetic-bar for 2 sec or longer in measuring
mode) Level2 Next stage entering function and setting saving function
Move to the previous stage from the level entered.
Next level mode that is configured in LEVEL1 and Change in Level2 setting Plus
Next level mode that is configured in LEVEL1 and Change in Level2 setting Minus
6. Detector Operation Flow
DESCRIPTION