Unpacking - PENSOTTI PCC 34-H Instruction Manual

3.2 Unpacking

■ The materials (cardboard) used for packing the
appliance are fully recyclable.
■ It is recommended that the packing material is only
removed prior to installing the boiler. The
manufacturer will not be held responsible for damage
caused by incorrect storage of the product.
■ Packing materials (plastic bags, polystyrene, nails,
etc.) must not be left within reach of children, in that
these items represent a potential hazard.
A. Place the packed appliance on the floor (see fig. 1)
making sure that the "up" arrow is facing down. Remove the
staples and open out the four flaps of the box.
B. Rotate the boiler 90° while manually supporting it from
underneath
C. Lift the box and remove the protections. Lift the boiler by
grasping the rear part and proceed with the installation.
STORAGE & HANDLING
Please note that prior to installation the Pensotti North
America boilers should be stored in the horizontal position
with no more than three boilers to a stack;
Ensure that the boilers are stored in dry conditions and be aware that the carton is a two-man lift;
INSTALLATION INSTRUCTIONS
A
C
Fig 1
B
19