Unpacking - PENSOTTI Solenne PCH50B-H Instruction Manual

3.2 Unpacking

•
The materials (cardboard) used for packing
the appliance are fully recyclable.
•
It is recommended that the packing material
is only removed prior to installing the boiler.
The manufacturer will not be held responsible
for damage caused by incorrect storage of
the product.
•
Packing materials (plastic bags, polystyrene,
nails, etc.) must not be left within reach of
children, in that these items represent a
potential hazard.
A. Place the packed appliance on the floor (see fig. 1)
making sure that the "up" arrow is facing down.
Remove the staples and open out the four flaps of
the box.
B. Rotate the boiler 90° while manually supporting it
from underneath
C. Lift the box and remove the protections. Lift the boiler
by grasping the rear part and proceed with the installation.
STORAGE & HANDLING
Please note that prior to installation the Granby Heating Products LLC boilers should be stored in the horizontal
position with no more than three boilers to a stack;
Ensure that the boilers are stored in dry conditions and be aware that the carton is a two-man lift;
Professionally qualified personnel in accordance with current laws and standards
and in line with the manufacturer's instructions must install the appliance.
INSTALLATION INSTRUCTION
Fig 1
18