PENSOTTI PCC 34-H Instruction Manual page 20

2.8 INFO Menu display
Press the ' ' INFO Button to display the boiler data. Once pressed, the parameter number will appear on
the left side of the display and the associated parameter value will appear on the centre of the display. Use
' ' and ' ' buttons of
Press the ' ' INFO button to exit the display mode.
The list of available display data is the following:
Parameter Icon
d00
d01
d02
d03
d04
d05
d06
d07
d08
d09
TECHNICAL CHARACTERISTCS
Heating Temperature setting to scroll the list of available data.
DHW sensor temperature
Outdoor sensor temperature (only with sensor temperature connected)
Fan speed
Low temperature circuit sensor (only with Zone PCB connected)
Heating return sensor temperature (only with modulating pump connected)
Solar panel sensor temperature (only with Solar PCB connected)
Solar storage cylinder temperature (low level) (only with Solar PCB connected)
Solar storage cylinder temperature (high level) (only with Solar PCB connected)
Solar panel sensor temperature 2 [ only with Solar PCB connected ] (SCS2)
Extra Solar storage cylinder temperature [ only with Solar PCB connected ] (SBS3)
Description
17