Setting The Parameters - PENSOTTI PCC 34-H Instruction Manual

5.3 Setting the parameters

02
P00
03
P00
01
P01
02
P01
00
P02
01
P02
REGULATION INSTRUCTIONS
PARAMETER P00 – SELECTS THE MODEL OF BOILER
To enter the parameters menu, follow the previously described procedure (see
paragraph 5.2 'Accessing the parameters menu' - steps 1-4).
5. Use '
' and ' ' buttons (D.H.W temperature setting)
value of the parameter:
00 = NA
01 = 18 KW
02 = NA
03 = NA
04 = 34 kW
05 = 50 kW
06 = NA
6. Press mode selection button '
parameter operative.
7. To exit from the parameters menu, press simultaneously '
buttons.
PARAMETER P01 – SELECTS THE TYPE OF BOILER
To enter the parameters menu, follow the previously described procedure (see
paragraph 5.2 'Accessing the parameters menu' - steps 1-4).
5. Use ' ' and ' ' buttons (D.H.W temperature setting)
value of the parameter:
00 = NA
01 = PCC 34
02 = PCI 18/8, PCI 34/20
03 = PCH 18/B, PCH 34/B, PCH 50/B
04 = NA
05 = Only heating boiler
6. Press mode selection button '
to render the new parameter operative.
7. To exit from the parameters menu, press simultaneously '
buttons.
PARAMETER P02 – SELECTS THE TYPE OF GAS SUPPLY
To enter the parameters menu, follow the previously described procedure (see
paragraph 5.2 'Accessing the parameters menu' - steps 1-4).
5. Use ' ' and ' ' buttons (D.H.W temperature setting)
value of the parameter:
00 = Natural Gas
01 = LPG
02 = G25
6. Press mode selection button '
parameter operative.
7. To exit from the parameters menu, press simultaneously '
buttons.
to modify the
' to confirm and to render the new
to modify the
' to confirm and
to modify the
' to confirm and to render the new
' and ' '
' and ' '
' and ' '
44