PENSOTTI PCC 34-H Instruction Manual page 48

5.2 Setting the parameters
To modify the pre-set values of the parameters reported in the previous table, open the parameter settings menu as
follows:
2
P00
1
P01
Adjust the value of the parameter using the procedure described in the following pages.
REGULATION INSTRUCTIONS
1. Place mode selection button '
visualized by
2. Keep pressed '
and wait for
display.
3. Release buttons '
4. Use ' ' and '
setting to select the parameter to modify;
symbol;
' and ' ' buttons simultaneously
symbol and 'P00', to appear on the
' and ' ';
' buttons of heating temperature
' in OFF position,
43