Time And Date Settings - Snom M70 User Manual

User Manual M70 / M80 / M90

Time and date settings

Available time formats are 24 hours and 12 hours AM/PM. There are six available date formats
. The time and the date are received from and synchronized the base station where the handset is
registered, so normally it is not necessary or advisable to adjust them manually.
Time format
1. In the Settings menu (Fig. 2, "Settings" on page 45) select Time & date.
2. In the Time & date menu, select Time (Fig 1).
Fig. 1
Note: You can enter a different hour and minute setting on the handset's keypad. When
the handset is rebooted, the clock will be reset to the time setting of the base station.
3. Select Format.
4. Select 24 hour or am/pm.
5. Press the function key underneath Select to select and return to the Time screen (Fig. 2).
6. Press Save.
Date format
1. In the Settings menu (Fig. 2, "Settings" on page 45), select Time & date.
2. In the Time & date menu, select Date (Fig 4).
Fig. 4
Note: You can enter a different date setting on the handset's keypad. When the handset
is rebooted, the date will be reset to the date setting of the base station.
Fig. 2
Fig. 5
Fig. 3
Fig. 6
48
Getting to know