Setting The Language; Setting The Date And Time Format - Snom 02-132047 User Manual

To view the IP address of your base station:
On the Status menu, with Network highlighted, press Enter�
1�
2� Press or
3� Press to scroll down to view the IP address�
To view the firmware version of your handset / base station:
On the Status menu, press
1�
2� Press or
3� Press to scroll down to view the firmware version�
To view the line status of your handset:
On the Status menu, press
1�
2� Press or
3� Press or

Setting the language

Press the MENU/Confirm key�
1�
2� Press and
3� Press or
With Language highlighted, press Enter�
4�
5� Press or
Press Set to save, or press Back to cancel�
6�

Setting the date and time format

Press the MENU/Confirm key�
1�
2� Press and
3� Press or
4� Press or
5� Press or
DD/MM/YYYY)�
6� Press or
Press Set to save, or press Back to cancel�
7�
to select IPv4 or IPv6, and press Enter�
or
to select This device or Base/Cell and press Enter�
or
to select a line and press Enter�
to scroll through the information about the line�
to select
to scroll to User settings, and press Enter�
to choose the desired language�
to select
to scroll to User settings, and press Enter�
to scroll to Date/time, and press Enter�
to set the Date format (MM/DD/YYYY or
to set the Time format (12-hour or 24-hour)�
to scroll to Product Info and press Enter�
to scroll to Line and press Enter�
(Settings), then press OK�
(Settings), then press OK�
60