Table of Contents
Advertisement
User Manual M70 / M80 / M90
A
dditional Important Information USA
FCC ID: T7HCT8631
Intended Use
This telephone is designed for use with a Snom M-series base. Any other use, modification or
reconstruction of the product is considered unintended use.
Important Safety Information
Follow all instructions and warnings in the user manual, and on the equipment to prevent accidents.
WARNING
Fire, electric shock, or other injury may result if you do not observe the following safety precautions:
•
Do not use in or near a bathtub, sink, swimming pool, wet basement, or other water.
•
Do not use this or any cordless telephone in the vicinity of a gas leak.
•
Do not use in environments subject to explosion hazards, such as auto paint shops.
•
Do not use near medical equipment or if you have a pacemaker.
•
Unplug from wall outlet before cleaning.
•
To prevent overheating, do not block slots and openings in the cabinet or the back or bottom of
equipment. Do not place equipment on beds, sofas, rugs, or other surfaces that generate fibers.
•
To prevent overheating, do not place near or over a radiator or in a cabinet without
properventilation.
•
To reduce the risk of fire, use only 26 AWG or larger UL-listed or CSA-certified telecommunication
line cord.
•
Operate using the power source indicated on the marking label. If you are unsure about the type of
power supply to your home or business, consult your power company.
•
Do not place objects on the power cord. Do not step on the power cord.
•
To prevent exposure to dangerous voltage, do not push objects through cabinet slots.
•
To reduce the risk of electric shock, do not disassemble equipment or open parts other than
specified access doors. Opening or removing parts may expose you to dangerous voltage or other
risks. Incorrect reassembly can cause electric shock when equipment is subsequently used.
•
Do not overload wall outlets and extension cords.
•
Unplug equipment and contact qualified service if any of the following has occurred:
◦
Power supply cord or plug has been damaged or frayed.
◦
Liquid has been spilled on or in the equipment.
◦
Equipment has been exposed to rain or water.
◦
Equipment does not work normally even when the operating instructions are followed. Adjust
only those controls referred to in the operating instructions. Improper adjustment of other
Safety, Disposal, Cleaning, Standards
11
- Quick Links:
- Setting up the Phone
- M70 / M80 at a Glance
Hide quick links:
Advertisement
Table of Contents
