Adding Contacts - Snom M70 User Manual

User Manual M70 / M80 / M90
• Assigning a ringtone to the contact. Twenty (20) ringtones are available and can be set for calls
in general and individually to announce ringing calls from the respective contact. The default
is melody 1. For assigning ringtones to contacts, see "Editing contacts" on page 38. For the
general settings, see "Ring melody" on page 47.
• Assigning a speed dial key to the contact. The keys 2 to 9 can be assigned for speed dialing
eight of your contacts. If the contact has more than one phone number, the speed dial function
is assigned to the default number (see table on page 36). For assigning speed dial keys, see
"Editing contacts" on page 38.

Adding contacts

See "Letter modes" on page 32 and "Entering phone numbers (numeral mode)" on page 31 on
how to enter names and numbers.
1. Open the contacts menu and press the function key underneath More" (Fig. 6) to open the Options
menu (Fig. 7).
Fig. 6
2. Scroll to Add contact and press the function key underneath Select. The Add contact screen
opens (Fig. 8).
3. With Name highlighted, press the function key underneath Edit. The blank editing field for Name
appears (Fig. 9).
4. Enter the name and press the function key underneath Save. The name has been added to the
Edit contact menu (Fig. 10).
Fig. 10
Note: The name is stored only temporarily. If you leave the edit menu without adding a
phone number and saving the contact, the name will not be saved. If you try saving the
contact with just a name or a number, you will receive an error message (Fig. 11)
Fig. 7
Fig. 11
Fig. 8
Fig. 12
37
Getting to know
Fig. 9
Fig. 13