Bluetooth; Enabling And Disabling Bluetooth; Pairing - Snom M70 User Manual

User Manual M70 / M80 / M90
2. In the Call Forward menu (Fig. 1), select the call forwarding event
3. Press the function key underneath Off (e.g., Fig. 2 and 4).
4. Press the red cancel key
Settings menu.

Bluetooth

The handset can be used with a Bluetooth headset which must be paired with the handset first. When
the headset has been paired, it is added to the list of Paired Devices. The connection to the headsets
on this list can be disconnected and reestablished with one key press without having to go through
the pairing process again.
In the default setting, Bluetooth is disabled. To be able to use Bluetooth, the function must be enabled.
To save battery power and avoid unnecessary radiation, however minimal, you may want to disable
Bluetooth when you are not using it. When Bluetooth is enabled, the Bluetooth logo
right of the signal strength indicator in the top line of the display.
Fig. 1

Enabling and disabling Bluetooth

1. Open the Settings menu and press
2. Press Select or the center of the navigation key to select Enable/Disable (Fig. 1 and 2). You will
be asked whether to enable or disable Bluetooth, depending on its current status (Fig. 3).
3. Press Yes or No to save changing or keeping the current status and to return to the Bluetooth
menu.

Pairing

1. Make sure that Bluetooth is enabled.
2. Scroll to Search for devices and press Select or the center of the navigation key.
3. Put the headset into pairing mode as described in your headset's user guide.
4. If the phone has detected more than one headset, select yours from the list and press Pair. When
pairing has been successful, you will see the message "Bluetooth connection established".
once to return to the call forward menu, twice to return to the
Fig. 2
to go directly to Bluetooth at the bottom of the menu.
Fig. 3
55
Getting to know
is shown to the