Settings - Snom M70 User Manual

User Manual M70 / M80 / M90
S
ettings
This submenu contains a variety of settings that determine the handset language, time and date
formats, call forwarding, etc.
Fig. 1
Audio settings
Time & date
Language
LED signal
Power Save
Security
Handset name
Line
Reset settings
Status
Auto answer
Silent charging
Do not disturb
Hide number
Call forward
Idle screen saver
Bluetooth
Fig. 2
Ringer and alert tones and their volume settings, various other
sounds, and vibrator settings. See "Audio settings" on page 46.
See "Time and date settings" on page 48.
List of languages available for the handset. The default is English;
scroll to a different language and press the function key underneath
"Select" to change the setting to the selected language.
See "LED indications" on page 26.
Determines how many seconds after the last activity on the handset
the display illumination will turn off. See "Power save" on page 49.
Settings for automatically locking the keypad and for changing the
handset PIN. See "Security" on page 49.
Here you can enter a name to be displayed below the account/
extension number on the display. The default is blank.
Selecting the default SIP extension/account for outgoing calls, if
more than one is available. See "Line" on page 51.
Press the function key underneath "Yes" to reset the handset settings.
NOTE: Resetting the handset will not clear the DECT registration.
Removing the registration: See "Deregistering" on page 44.
View IP & MAC addresses, SW & HW versions of base station and
handset, IPEI, etc. See "Status" on page 52.
Determines how incoming calls can be accepted. See "Auto answer"
on page 52.
Determines whether the phone will ring when the battery is charging
or not. The default is "Off" (phone rings).
See "Do not disturb (DND)" on page 53.
Determines whether your phone number will be sent to callers/
callees. You can hide your number for the next call, always, or never.
The default is "Off" (your phone number will be sent).
See "Call forwarding" on page 54.
Will dim display illumination before turning it off completely as set in
"Power Save".
Using the handset with a BT headset. See "Bluetooth" on page 55.
45
Getting to know