Audio Settings - Snom M70 User Manual

User Manual M70 / M80 / M90

Audio settings

The audio settings contain the available ringer and alert tones and their volume settings, various
other sounds like key and confirmation sounds, etc., and the vibrator settings.
Silent
Ring volume
Ring melody
Ring settings (normal,
urgent, emergency)
Alert volume
Alert tone
Vibrator
Key sound
Confirmation sound
Coverage warning
Charger warning
Speakerphone profiles
Noise cancel mode
This setting determines whether incoming calls will be announced visually
only or visually and acoustically. The options are on and off. When set to
"on", incoming calls will be announced visually only. The default is off. It is
possible to add the vibrator to the visual announcement.
Setting the ringer volume. See "Ring volume" on page 47
Selecting a ringer. See "Ring melody" on page 47
Selecting a ringer for normal and urgent calls and for emergency calls
with high, medium, and low priority. The settings are done the same way
as Ring melody.
Ring emergency: This is the ringer played during the pre-alarm delay, if
available and configured (see chapter "Emergency alarm" in the "M900
Admin and Installation Guide" or ask your administrator).
Setting the volume for the alarm clock tones (single alarm and recurrent
alarm). See Ring volume on how to increase and lower the volume.
Selecting the ringtone for the alarm clock (one-time-only alarm and
recurrent alarm). See Ring melody on how to do the selection.
Having the phone indicate incoming calls by vibration with or without
ringer. See "Vibrator" on page 47.
Determines whether pressing a key will result in a Click or beeping Tone
or no sound. The default is Silent.
Determines whether the handset will emit a beep when a setting is
changed. Select On or Off. The default is On.
Determines whether the handset will emit a warning tone when it
is getting close to the coverage limit of the base station or multicell
installation. The default setting is Off.
Determines whether the handset will emit a beep when it is placed in the
charger. Select On or Off. The default is On.
Options: Balanced (default) and Loud
Options: Off (default), Low, High
46
Getting to know