Line - Snom M70 User Manual

User Manual M70 / M80 / M90

Line

The handset supports up to ten extensions (accounts/phone numbers). On corded Snom deskphones
they are called "identities".
Note: Each handset will only support one identity per SIP server, regardless whether
the servers are in your office network or provided externally by an IP provider.
In the Line menu (Fig. 1), you select the identity (and thus the SIP server, i.e., "phone line", where it is
set up) that will be your default identity when making calls. This identity is shown on the display (see
Fig. 1, "Security" on page 49).
Fig. 1
• Selecting the default identity for outgoing calls.
1. Use the up/down arrows on the navigation key to select the extension.
2. Press the OK key or the function key underneath Select to save (Fig. 1). This is the identity
that is shown on your display.
• Changing the identity for the current outgoing call. The default identity will not be changed.
1. Before pressing the green key
(Fig. 3).
◦
When dialing manually: You can do this at any time while or after entering the digits on
the keypad manually.
◦
When calling a number from the global phonebook, select the contact, then press the
function key underneath Line (Fig. 4).
2. Select the extension to be used for the next outgoing call and press the function key
underneath Select (Fig. 1 and 2).
3. When dialing manually, the display will return to the Enter number screen (Fig. 3) where
you can enter any remaining digits, if necessary. When dialing a number from the central
directory, the display will return to the directory page with the number you want to dial (Fig. 4).
4. Press the green key
Fig. 2
to dial a number, press the function key underneath Line
to dial.
Fig. 3
51
Getting to know
Fig. 4