Chapter 1: Overview; Features; Twisted Pair Ports; Sfp Slots - Allied Telesis AT-x230L-17GT Installation Manual

Chapter 1: Overview

Features

Twisted pair
ports

SFP slots

6
This section describes the hardware features of the x230L Series Gigabit
Lite Ethernet Switches.
Here are the basic features of the 10/100/1000Mbps twisted-pair ports:
AT-x230L-17GT: 16 non-PoE ports per switch

AT-x230L-26GT: 24 non-PoE ports per switch

10BASE-T (IEEE 802.3i), 100BASE-TX (IEEE 802.3u) and

1000BASE-T (IEEE 802.3ab) compliant
IEEE 802.3u Auto-Negotiation compliant

Auto-MDI/MDIX

Full wire-speed non-blocking

IEEE 802.3x Flow Control in 10BASE-T/100BASE-TX full-duplex

operation
IEEE 802.3x Back Pressure in 10BASE-T/100BASE-TX half-

duplex operation
IEEE803.3z 1000BASE-T Flow Control

Support for jumbo packets up to 10KB

One RJ45 connector on front panel for RS232 console purposes.

Here are the basic features of the SFP ports:
AT-x230L-17GT: 1 SFP port per switch

AT-x230L-26GT: 2 SFP ports per switch

Available for 100Mbps or 1000Mbps of fiber, and 1000Mbps of

copper
Support 100BASE-FX and 1000BASE-SX/LX transceivers.

You need to purchase SFP transceivers separately. See the product data
sheets for the specific ATI SFP modules supported by the x230L Series
switches.