Manual Defibrillation Using Pads Procedure - Schiller PHYSIOGARD Touch 7 User Manual

5 Defibrillation
5.3 Manual Defibrillation Using Pads
Event
Metronome CPR Guide
Fig. 5.5 Manual defibrillation
Page 88
5.3.4

Manual Defibrillation Using Pads Procedure

1. Connect the electrode cable to the pads connector.
2. If the device starts in Monitoring or AED mode, proceed according to the descrip-
tion in chapter 5.2.1 Activating the manual defibrillation mode, page 82.
3. Select the energy via the touch screen +-.
4. Initiate the energy charging by pressing "Charge".
 Danger of electric shock!
• Do not, under any circumstances, touch the patient during shock delivery.
• Make sure that the patient does not touch any conducting objects.
5. Trigger the shock by pressing the button
6. Finish the therapy (see
DEFIGARD/PHYSIOGARD Touch 7
7 Finishing the Therapy page
.
106).