Schiller PHYSIOGARD Touch 7 User Manual page 132

Table of Contents

Advertisement

12
Technical Data
12.1 System data
Environmental conditions
For transient operation
Environmental conditions
For Transport and storage
between uses
Time for warming up/cooling
down
MIL STD 810G
Environmental conditions
Defibrillation electrodes
Storage
Storage max. 10 days
Display
Type
Dimensions
Alarm sound level
Connections
Interfaces
Page 132
Operation in NORMAL USE for a period not more than 20 min under the
following environmental operating conditions:
• a temperature range of - 20 °C to + 50 °C;
• a relative humidity range of 15 % to 90 %, non-condensing, but not requiring a
water vapour partial pressure greater than 50 hPa.
Operation in NORMAL USE for a period of 1 hour under a temperature range of
- 10°C to + 50°C;
• - 40 °C to + 5 °C without relative humidity control;
• + 5 °C to + 35 °C at a relative humidity up to 90 %, non-condensing;
• > 35 °C to 70 °C at a water vapour pressure up to 50 hPa;
after having been removed from its protective packaging and subsequently
between uses.
• 30 minutes;
Time required for the DEFIGARD/PHYSIOGARD Touch7 to warm or cool from
the minimum/maximum storage temperature between uses until the DEFIGARD/
PHYSIOGARD Touch7 is ready for its intended use when the ambient
temperature is 20 °C.
Device was tested in accordance with:
• MIL STD 810G Method 501.5 Procedure III
• Tactical-standby to Operational (+60°C)
• MIL STD 810G Method 502.5 Procedure II Operation (-26°C).
• 0 ºC...50 ºC
• -40 ºC...75 ºC
• High-resolution colour LCD capacitive touch screen, protected by tempered glass
7 " (154 x 85.92 mm)
65 dBA for medium and high priority alarms
ECG patient cable, SpO
, NIBP, Temperature, CO2, IBP
2
USB
DEFIGARD/PHYSIOGARD Touch 7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Defigard touch 7

Table of Contents