Table of Contents
Advertisement
DEFIGARD/PHYSIOGARD Touch 7
1
2
3
4
5
Data Transmission
Transmission list
Communication history
Communication media
Printer
eCPR system
Enable bluetooth discoverability
User guide
(1) Power On/OFF
(2) Paper feed
(3) Power On/Off status LED
6
7
(4) Status LED printer
(5) Battery status LED (blinks every 4 s = battery half, twice every 4 s =battery low,
once every second =battery must be charged.
(6) Bluetooth Status LED
(7) Bluetooth On/Off button
3.5
Connection to a ePCR system
The following data can be transmitted via bluetooth to a ePCR (electronic patient care
report) system:
• Patient vital data
• Patient identification and information
• RECG in pdf format
• Trends
According to the ePCR settings this can be as spot measurement, regulary or for a
defined period of time.
For details information refer to the ePCR manufacturer's user manual.
3.5.1
Pairing Bluetooth devices
• The DEFIGARD/PHYSIOGARD Touch 7 acts like a slave to the ePCR equipment,
therefore, the pairing must be initiated on the ePCR equipment.
• The pairing is to be perfomed only the very first time that an ePCR equipement is
connected.
1.
Select the transmission icon to display the Data Transmission menu
2.
Select ePCR
3.
Activate the Bluetooth discoverability
• Please contact your local SCHILLER distributor for compatible ePCR systems list
or interface request.
• In case of communication problem with a Bluetooth device, switch it off and on
again. Scan again for the Bluetooth device.
ON
Initial Operation
Connection to a ePCR system
3
3.5
Page 35
Advertisement
Table of Contents
