Before Use - Riso ComColor FW Series Safety Information Manual

Before Use

This section describes the precautions that must be observed before using the machine.
Installation Location
Observe the following precautions.
■ Your dealer will help you to determine a proper location for the machine at the time of delivery.
■ When moving the machine, contact your dealer or authorized service representative.
■ Avoid installing the machine in the following locations. Otherwise, incorrect operation, malfunction, or
accident might occur.
• Places subject to direct sunlight or excessively illuminated such as next to windows
(if inevitable, use a curtain at the window)
• Places subject to sudden temperature variations
• Places excessively hot and humid or cold and dry
• Places close to fire or heat
• Places directly subject to cold air from air conditioners or hot air from heaters, as well as radiant heat
• Places with poor air permeability or ventilation
• Dusty places
• Places subject to excessive vibration
■ Install the machine in a place whose levelness is within the following specified range.
Installation surface level: 2° or less
■ Operate the machine under the following environment conditions.
Temperature range: 15°C to 30°C (59°F to 86°F)
Humidity range: 40% to 70% RH (non-condensing)
Power Connection
Observe the following precautions.
■ Connect the plug securely to the electrical outlet to avoid a loose connection. You may have two or more
power plugs if you have options connected.
■ Install the machine near an electrical outlet.
■ When the scanner is connected to the printer using the USB cable, the scanner is turned on and off by the
power of the main unit.
7
ComColor FW Series Safety Information