Before Use; Installation Location; Power Connection - Riso VALEZUS T2100 User Manual

Before Use

This section describes the precautions that must be
observed before using the system.

Installation Location

Observe the following precautions.
■ Your dealer will help you determine a proper
installation location for the system upon
delivery.
■ When moving the system, contact your service
representative.
■ Avoid installing the system in the following
locations. Otherwise, incorrect operation,
malfunction, or accident might occur.
• Places exposed to direct sunlight or excessive
illumination such as near a window
(If such is unavoidable, install curtains to cover the
window.)
• Places subject to sudden temperature variations
• Places excessively hot and humid or cold and dry
• Places close to fire or heat
• Places directly subject to cold air from air
conditioners or hot air from heaters, as well as
radiant heat
• Places with poor air permeability or ventilation
• Dusty places
• Places subject to excessive vibration
■ Install the system in a place whose levelness is
within the following specified range.
Installation surface level: 2 degrees or less
■ Operate the system under the following
environment conditions.
Temperature range: 15 °C - 30 °C (59 °F - 86 °F)
Humidity range: 40% - 70% RH (non-condensing)

Power Connection

Observe the following precautions.
■ Connect the plug securely to the optional
connection outlet on the printer main unit to
avoid a loose connection.
■ Install the system near an electrical outlet.
■ The power on / off of the JOINT UNIT and
dedicated equipment interlocks with the power
supply of the printer.
VALEZUS T2100 User's Guide
9