Riso ComColor FW Series Safety Information Manual page 21

Operating Environment
Dimensions (W × D × H)
Weight
Safety Information
Dimensions When Operating (W × D × H)
1 Within 10 minutes after the last print job
*
2 When using plain paper and recycled paper (85 g/m
*
Chart used: Print measurement pattern [Color measurement sample 2 (JEITA standard pattern J6)]
3 The margin when printing envelopes is 10 mm (3/8").
*
The guaranteed area when printing images is the area enclosed within 5 mm (7/32") of the edges of the paper.
4 Without printing and temperature adjustment operation
*
5 One gigabyte (GB) is calculated as 1 billion bytes.
*
6 The continuous print speed varies depending on the type of optional output equipment connected.
*
Face down finisher: Without offset: 120 sheets/minute (A4-LEF Simplex)
Offset output: 105 sheets/minute (A4-LEF Simplex)
7 When setting [Power Consumption (in sleep)] to [Low].
*
8 LEF stands for Long edge feed.
*
9 When using duplex print: 340 mm × 460 mm (13 3/8" × 18 1/8")
*
10 Duplex printing is not guaranteed with thick paper weighing 104 g/m
*
11 When using plain paper (62 g/m
*
RAL-UZ205 Noise Emissions while printing
Temperature: 15ºC to 30ºC (59ºF to 86ºF)
Humidity: 40% to 70% RH (non-condensing)
In use:
1,030 mm × 725 mm × 1,115 mm (40 19/32" × 28 9/16" × 43 29/32")
With cover and tray closed:
775 mm × 705 mm × 970 mm (30 17/32" × 27 25/32" × 38 7/32")
Approx. 130 kg (286 lb)
Indoor type, pollution degree 2*, At altitudes of 2,000 m or lower
The pollution degree of the usage environment due to dirt and dust
*
in the air. Degree "2" corresponds to a general indoor environment.
With the front cover open and the operation panel in the upright position:
1,185 mm × 1,215 mm × 1,115 mm (46 21/32" × 47 27/32" × 43 29/32")
2
(23-lb bond)), and standard density setting
2
(17-lb bond))
2
or greater.
ComColor FW Series Safety Information
20