Riso ComColor FW Series Safety Information Manual page 11

The size varies depending on the optional equipment used.
*1 Main unit only
Width
Main unit and Scanner (when using special scanner stand)
Main unit and Face Down Finisher
Main unit, Multifunction Finisher, and Finisher/Fold Unit
Main unit and Multifunction Finisher
Main unit and Wide Stacking Tray
Main unit and Auto-Control Stacking Tray
Main unit, Face Down Finisher, and Wide Stacking Tray
Main unit, Face Down Finisher, and Auto-Control Stacking Tray
*2 Main unit only (with the operation panel in the upright position)
Height
Main unit and Scanner (when using special scanner stand)
Main unit and Face Down Finisher
Main unit and Multifunction Finisher
*3 Main unit only
Depth
Main unit and Scanner (when using special scanner stand)
Main unit and Multifunction Finisher
Main unit, Multifunction Finisher, and Finisher/Fold Unit
Main unit, Scanner (when using special scanner stand),
Multifunction Finisher, and Finisher/Fold Unit
The ComColor FW5230/FW5230R is used in the illustration of this machine.
● As seen from the side
1325 (52 3/16")
1635
(64 3/8")
830 (32 21/32")
*3
100 (3 15/16")
ComColor FW Series Safety Information
Units: mm (inch)
1,185 mm (46 21/32")
1,185 mm (46 21/32")
1,420 mm (55 29/32")
2,350 mm (92 1/2")
2,150 mm (84 5/8")
1,680 mm (66 5/32")
1,580 mm (62 7/32")
1,920 mm (75 19/32")
1,815 mm (71 1/2")
1,115 mm (43 29/32")
1,260 mm (49 5/8")
1,315 mm (51 25/32")
1,130 mm (44 1/2")
1,215 mm (47 27/32")
1,325 mm (52 3/16")
1,260 mm (49 5/8")
1,340 mm (52 3/4")
1,405 mm (55 5/16")
10