Table of Contents
Advertisement
Configuration
There are no configuration options on the SLCD CD-ROM
drives. DOS drivers for the SLCD CD-ROM drive are
described in help files on a diskette supplied with the drive.
SCSI drives
Cabling
Apricot upgrade kits are supplied with a suitable signal
cable. The cable should be connected between the SCSI
card and the rear of the drive.
The connector at the drive end should be fitted with a
termination assembly. The following illustration shows the
routing of the cable.
SCSI CABLE
int l e
DX
TM
i
486
46
Advertisement
Table of Contents
