Table of Contents
Advertisement
Installing add-ons
Introduction
This section contains instructions on installing add-ons and
upgrades in the XEN-LS II. The areas covered include:
* expansion cards
* additional memory
* processor upgrades
* additional drives
This document should be your only source of information
when installing any of these.
Read this document before purchasing an add-on or
upgrade. If, having read the relevant instructions, you are
not confident about installing the upgrade, you may wish to
have your supplier or service organisation install it for you.
Before you start installing the upgrade you should be
thoroughly familiar with all the relevant instructions in this
guide and any appropriate sections of your Owner's
Handbook .
Warning
Never carry out any work on the equipment with power
applied. Always switch off at the mains and remove the
power lead from the equipment before starting work.
Appendices at the rear of this section provide information
on expansion card configuration and a pinout of the
motherboard video feature connector.
The only tool required to complete the installation of any of
the upgrades is a small cross-head screwdriver.
21
Advertisement
Table of Contents
