Drives - Mitsubishi Electric apricot XEN-LS II Using Setup And Installing Add-Ons

5.25" drives

The 5.25" drive tray in the XEN-LS II system unit can
contain any standard size half height 5.25" device. Apricot
supplies a range of tape and CD-ROM drives, and a 5.25"
floppy drive, for this bay.
The following instructions describe the installation of a drive
in the bay. The Generic instructions apply to all drives, and
describe the physical installation of a drive.
Instructions specific to each drive type are given after the
generic instructions.
Generic
1. Power the system down.
2. Take suitable anti-static precautions and remove the
system unit cover.
If you are unfamiliar with Apricot's recommended
anti-static precautions and/or the process of
removing the system unit cover refer to your
Owner's Handbook .
3. Remove the two screws that secure the drive bay
and slide the bay backwards.
40
5.25" BAY
SECURING SCREWS